Fubarino mini Starting point ?

Created Sun, 22 Feb 2015 16:48:54 +0000 by linuxha

linuxha

Sun, 22 Feb 2015 16:48:54 +0000

I have 4 minis and while not paying attention I set one of my compiles to the mini (instead o the Uno32) and it failed. Since I seem to recall I need to setup things a bit differently for th mini I thought it might be a good idea to ask if anyone has a good tutorial or info on a starting point for the new user.

Thanks

majenko

Sun, 22 Feb 2015 21:31:50 +0000

In what way did it fail? There shouldn't be anything different you need to do to use the Mini - other than installing the CDC/ACM drivers...

linuxha

Mon, 23 Feb 2015 04:02:26 +0000

With your comment I checked with the version of mpide I have and I'd been running. It's 20130817 and I'm switching to 20140821 (I'll find something more up to data).

Current error starts with:

libraries/Ethernet/DSPI.cpp:1117:1: error: 'DSPI1' does not name a type libraries/Ethernet/DSPI.cpp:1149:1: error: 'DSPI1' has not been declared

Ill try to get a later version.

majenko

Mon, 23 Feb 2015 11:25:45 +0000

Sounds like you're using an early version where the second SPI port hadn't been defined in the board definition. That should be fixed by upgrading.

linuxha

Thu, 26 Feb 2015 00:37:47 +0000

Cool, 20150204 (0150) and the latest W5500 1.5 code work well. I haven't test the code on the Fubarino mini. That will be a bit later. Thanks

lucylee378

Fri, 27 Feb 2015 10:42:02 +0000

Besides the existing Fubarino SD part, I've also created a Fubarino Mini Fritzing part. You can download it from the Fubarino website here: