Firmware update

Post Reply
Posts: 40
Joined: Wed Oct 01, 2014 6:05 pm

Firmware update

Post by nroff-man » Wed Oct 01, 2014 6:14 pm


Last year I bought one of these units with
the intention of using it to develop PIC32 support
in my PICMicro programmer found at

Well, it's been a bit longer than anticipated but
I finally got around to it.

Here is an overview of the configuration.

I used my tool to update the firmware to the latest
found at:

If you do update the firmware then please understand
I can't be responsible if anything goes wrong and you
will need to reboot the R-PI (currently at least) to
return the UART feature to the GPIO pins to talk to
the bootloader.

Later I will see about making some project templates
to bypass using the IDE.

Good luck

It's all a bit quiet in the chipKITPi forum isn't it? :-)

Post Reply