Fubarino mini Starting point ?

Post Reply
linuxha
Posts: 10
Joined: Sun Oct 05, 2014 6:30 am

Fubarino mini Starting point ?

Post by linuxha » Sun Feb 22, 2015 5:48 pm

I have 4 minis and while not paying attention I set one of my compiles to the mini (instead o the Uno32) and it failed. Since I seem to recall I need to setup things a bit differently for th mini I thought it might be a good idea to ask if anyone has a good tutorial or info on a starting point for the new user.

Thanks

User avatar
majenko
Site Admin
Posts: 2164
Joined: Wed Nov 09, 2011 7:51 pm
Location: UK
Contact:

Re: Fubarino mini Starting point ?

Post by majenko » Sun Feb 22, 2015 10:31 pm

In what way did it fail? There shouldn't be anything different you need to do to use the Mini - other than installing the CDC/ACM drivers...
Why not visit my shop? http://majenko.co.uk/catalog
Universal IDE: http://uecide.org
"I was trying to find out if it was possible to only eat one Jaffa Cake. I had to abandon the experiment because I ran out of Jaffa Cakes".

linuxha
Posts: 10
Joined: Sun Oct 05, 2014 6:30 am

Re: Fubarino mini Starting point ?

Post by linuxha » Mon Feb 23, 2015 5:02 am

With your comment I checked with the version of mpide I have and I'd been running. It's 20130817 and I'm switching to 20140821 (I'll find something more up to data).

Current error starts with:

libraries/Ethernet/DSPI.cpp:1117:1: error: 'DSPI1' does not name a type
libraries/Ethernet/DSPI.cpp:1149:1: error: 'DSPI1' has not been declared

Ill try to get a later version.

User avatar
majenko
Site Admin
Posts: 2164
Joined: Wed Nov 09, 2011 7:51 pm
Location: UK
Contact:

Re: Fubarino mini Starting point ?

Post by majenko » Mon Feb 23, 2015 12:25 pm

Sounds like you're using an early version where the second SPI port hadn't been defined in the board definition. That should be fixed by upgrading.
Why not visit my shop? http://majenko.co.uk/catalog
Universal IDE: http://uecide.org
"I was trying to find out if it was possible to only eat one Jaffa Cake. I had to abandon the experiment because I ran out of Jaffa Cakes".

linuxha
Posts: 10
Joined: Sun Oct 05, 2014 6:30 am

Re: Fubarino mini Starting point ?

Post by linuxha » Thu Feb 26, 2015 1:37 am

Cool, 20150204 (0150) and the latest W5500 1.5 code work well. I haven't test the code on the Fubarino mini. That will be a bit later. Thanks

lucylee378
Posts: 1
Joined: Fri Feb 27, 2015 11:28 am

Re: Fubarino mini Starting point ?

Post by lucylee378 » Fri Feb 27, 2015 11:42 am

Besides the existing Fubarino SD part, I've also created a Fubarino Mini Fritzing part. You can download it from the Fubarino website here:
**SignaturE**

Post Reply