Unable to upload compiled code to Chipkit Pro MX4 using the MPIDE

Talk about anything you want!
Post Reply
gnanum
Posts: 1
Joined: Wed Dec 23, 2015 1:13 am

Unable to upload compiled code to Chipkit Pro MX4 using the MPIDE

Post by gnanum » Wed Dec 23, 2015 2:31 am

I got the Chipkit Pro MX4 and as instructed, I am using the MPIDE that I downloaded from Chipkit.net
The MPIDE version only communicates via COM port and I have a USB. There is an option in the menu for serial communication, but it is grayed out for me.
Consequnetly, when I compile and try to upload, the IDE reports back saying that the com port may not selected properly.
I ended up searching for USB drivers that would work with the Chipkit Pro MX4 and that didn't work either.
What resource is there for me to read that will lead me to be able to communicate with the Chipkit Pro MX4.
Any help would be appreciated.
Thanks

User avatar
majenko
Site Admin
Posts: 2165
Joined: Wed Nov 09, 2011 7:51 pm
Location: UK
Contact:

Re: Unable to upload compiled code to Chipkit Pro MX4 using the MPIDE

Post by majenko » Wed Dec 23, 2015 9:30 am

I don't have an mx4, only and mx7, so I am not sure if this is relevant or not, but the mx7 has two usb ports and you have to select the right one. One goes to the debugger, and the other goes to an ft232 chip. You need to use the ft232 one with mpide.

Sent from my SM-T555 using Tapatalk
Why not visit my shop? http://majenko.co.uk/catalog
Universal IDE: http://uecide.org
"I was trying to find out if it was possible to only eat one Jaffa Cake. I had to abandon the experiment because I ran out of Jaffa Cakes".

Post Reply