Using USB

The PIC32MX3xx series parts do not have a USB controller. The other PIC32 series (i.e. PIC32MX4xx/5xx/6xx/7xx) all have a USB controller. The Uno32 uses a PIC32MX320F128H and therefore does not have a USB controller. The Uno32 and Max32 have standard FTDI serial to USB interface chips (FT232R) to keep consistent with the Arduino way of interfacing. However, it is also nice to be able to use the built in USB port. Many other PIC32 boards have this USB port brought out to a standard connector such as the Microchip USB Starter Kit and the Digilent Cerebot 32MX4 and Cerebot 32MX7. The latest version of HardwareSerial.cpp now supports the first serial port (Serial.begin(), Serial.print() etc) can be reconfigured to use the USB port instead. In order to take full advantage of this, first you have to program the board with the USB bootloader, then use the appropriate board setting in the BOARDS menu. If you are using a custom board in the boards file you can just add the following to your board description: custom_pic32.compiler.define=-D_USE_USB_FOR_SERIAL_ When using the USB for Serial, UART1 becomes Serial0 Serial1 etc, are still there normal configurations Serial.begin(baudrate); //The baudrate is ignored, when doing real USB, there is no baudrate. Receive is interrupt driven and behaves EXACTLY like regular Serial. NO CODE CHANGES REQUIRED. If you want to see how this is done, look at HardwareSerial.h and HardwareSerial.cpp, the actual usb code is in HardwareSerial_cdcacm.c and HardwareSerial_usb.c. The USB code was written by Rich T ( More documentation will be provided on how to do this soon. (Created 7/3/2011)
VN:F [1.9.22_1171]
Rating: 9.0/10 (1 vote cast)
Using USB, 9.0 out of 10 based on 1 rating