chipKIT Murum Lux Wall of Light: LEDs, Human Interface, and Ethernet


This weekend at the Bay Area Maker Faire in San Mateo, California, the chipKIT Platform will be showcased at the Microchip booth (located in the Expo Hall in Zone 2, booth 2510, east most side of the hall).

One of the items you’ll see at the booth is the Murum Lux (or Wall of Light), which uses PIC32 32-bit microcontrollers via the chipKIT Wi-FIRE and the chipKIT Fubarino Mini to create what Josh Ian Linsday calls “Murum Lux” (Latin for “Wall of Light”). Using a Sabrewing Development Board from Microchip for gesture control, he created an e-field box, then using IPLogika’s Ethernet modules, he connected the e-field box to the RGB LED matrix panel to control the content displaying on the “wall of light.” This stuff is way too cool to reduce down to a small paragraph!

You’ll have to check out Josh’s blog post to see how he put this all together!

VN:F [1.9.22_1171]
Rating: 8.6/10 (5 votes cast)
VN:F [1.9.22_1171]
Rating: +1 (from 1 vote)

See the New chipKIT Pi Board at Maker Faire New York

chipKIT Pi Banner

See the New chipKITTM Pi Board at Maker Faire

Come on out to the New York Maker Faire on September 21 and 22, 2013, at the New York Hall of Science. We’ll have demos of cool projects you can make at home, plus talk to chipKIT Embedded Platform and Arduino community experts. We’ll be selling chipKIT Uno 32 boards and the new chipKIT Pi boards  at special, faire-only discounts right at our booth. Project sheets will also be available or makers can download them later.
VN:F [1.9.22_1171]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.22_1171]
Rating: 0 (from 0 votes)