PROGRAMMING uC32 USING MPLAB X WITHOUT PICKIT

vhastorga
Posts: 1
Joined: Fri Nov 10, 2017 3:26 pm

Re: PROGRAMMING uC32 USING MPLAB X WITHOUT PICKIT

Post by vhastorga » Fri Nov 10, 2017 3:30 pm

222/5000
I'm new to this, I started with UC32 and I want to try it before I see if I buy the PICit 3. But by doing the steps of the manual http://chipkit.net/programming-chipkit- ... in-mplabx/ by adding the line that removes the hexa. I also always receive the same message.

when compiling

Code: Select all

"C:\Program Files (x86)\Microchip\xc32\v1.44\bin\xc32-gcc.exe"   -mprocessor=32MX340F512H  -o dist/default/production/blinky.X.production.elf build/default/production/_ext/327000265/drv_usart_mapping.o build/default/production/_ext/327000265/drv_usart_static.o build/default/production/_ext/327000265/drv_usart_static_byte_model.o build/default/production/_ext/639803181/sys_clk_pic32mx.o build/default/production/_ext/1544295906/sys_console_static.o build/default/production/_ext/340578644/sys_devcon.o build/default/production/_ext/340578644/sys_devcon_pic32mx.o build/default/production/_ext/822048611/sys_ports_static.o build/default/production/_ext/1688732426/system_init.o build/default/production/_ext/1688732426/system_interrupt.o build/default/production/_ext/1688732426/system_exceptions.o build/default/production/_ext/1688732426/system_tasks.o build/default/production/_ext/1360937237/app.o build/default/production/_ext/1360937237/main.o build/default/production/_ext/185269848/drv_tmr.o build/default/production/_ext/1408546951/sys_debug.o build/default/production/_ext/122796885/sys_int_pic32.o build/default/production/_ext/1264926591/sys_tmr.o    ..\..\..\..\bin\framework\peripheral\PIC32MX340F512H_peripherals.a      -DXPRJ_default=default  -no-legacy-libc    -Wl,--defsym=__MPLAB_BUILD=1,--defsym=_min_heap_size=2048,--gc-sections,--no-code-in-dinit,--no-dinit-in-serial-mem,-Map="dist/default/production/blinky.X.production.map",--memorysummary,dist/default/production/memoryfile.xml
"C:\Program Files (x86)\Microchip\xc32\v1.44\bin"\\xc32-bin2hex dist/default/production/blinky.X.production.elf 
make[2]: Leaving directory 'C:/microchip/harmony/v2_04/apps/blinky/firmware/blinky.X'
"--------------------------------------"
"User defined post-build step: ["C:\Program Files (x86)\Microchip\MPLABX\v4.01\mplab_ide\bin\avrdude.exe" -C "C:\Program Files (x86)\Microchip\MPLABX\v4.01\mplab_ide\bin\avrdude.conf" -v -p 32MX340F512H -c stk500v2 -P COM7 -b 115200 -U flash:w:"dist\default\production\blinky.X.production.hex" ]"
nbproject/Makefile-default.mk:103: recipe for target '.build-conf' failed
make[1]: Leaving directory 'C:/microchip/harmony/v2_04/apps/blinky/firmware/blinky.X'
nbproject/Makefile-impl.mk:39: recipe for target '.build-impl' failed
make[1]: *** [.build-conf] Error -1073741515
make: *** [.build-impl] Error 2

BUILD FAILED (exit value 2, total time: 4s)

Post Reply