Need Linker Scripts for PIC32MX150F128B

User avatar
Site Admin
Posts: 2188
Joined: Wed Nov 09, 2011 7:51 pm
Location: UK

Re: Need Linker Scripts for PIC32MX150F128B

Post by majenko » Sun Jun 19, 2016 4:40 pm

I have set it to have the Arduino-like bootloader-for-2-seconds-on-reset mode so there is nothing to "activate" for it - just reset at the right time or use the standard reset circuit (FT232's DTR -> 100nF Cap -> MCLR).

RA7 is the LED.

It *should* be running at 40MHz.
Why not visit my shop?
Universal IDE:
"I was trying to find out if it was possible to only eat one Jaffa Cake. I had to abandon the experiment because I ran out of Jaffa Cakes".

Post Reply