New test builds available for 20110907

Announcements for new builds and MPIDE enhancements
GeneApperson
Posts: 239
Joined: Wed Jun 01, 2011 9:53 pm
Location: Pullman WA
Contact:

Re: New test builds available for 20110907

Post by GeneApperson » Sat Sep 17, 2011 1:37 pm

The [install dir]/libraries folder is where the AVR Arduino libraries are. The standard distribution libraries for chipKIT boards are in [install dir]/hardware/pic32/libraries. Third party/contributed libraries go in [sketch folder]/libraries.

If you try porting MsTimer2 and have questions, let me know. If you send me a private message, I'll be sure to see it.

Gene

Andy123
Posts: 45
Joined: Sun Jul 17, 2011 6:03 pm

Re: New test builds available for 20110907

Post by Andy123 » Sat Sep 17, 2011 3:27 pm

This build 20110907 fails to compile Chipkit Network Shield Ethernet libraries
All 3 examples failed

Build 20110822 compiles and works just fine

ricklon
Posts: 178
Joined: Sun May 22, 2011 6:59 am

Re: New test builds available for 20110907

Post by ricklon » Tue Sep 20, 2011 10:49 pm

I'm looking to see what may have changed that impacted that compile. Thanks for reporting that.

KeithV
Posts: 181
Joined: Tue Sep 13, 2011 4:40 pm
Contact:

Re: New test builds available for 20110907

Post by KeithV » Thu Oct 13, 2011 6:08 pm

ArduinoMPIDE907\mpide-0022-windows-20110907-test\hardware\pic32\libraries\Servo\Servo.h
KeithV
Digilent

KeithV
Posts: 181
Joined: Tue Sep 13, 2011 4:40 pm
Contact:

Re: New test builds available for 20110907

Post by KeithV » Thu Oct 13, 2011 6:12 pm

Andy123 wrote:This build 20110907 fails to compile Chipkit Network Shield Ethernet libraries
All 3 examples failed

Build 20110822 compiles and works just fine

Andy, download the new libriaries from the Digilent WebSite, we fixed this for MPIDE 907. MPIDE 907 took out plib.h out of WProgams.h which included GenTypeDefs.h which is required by the Ethernet libary and that is why the old libraries will not build on MPIDE 907.

Hey, if you have the ability, see if this builds on Linux. I don't have Linux, but I went through and updated all of the includes to be case sensitive. I'll own breaking Linux builds, I just didn't know better.

I think this is the direct link:
http://www.digilentinc.com/Agreement.cf ... SD-0000318
Last edited by KeithV on Thu Oct 13, 2011 6:33 pm, edited 3 times in total.
KeithV
Digilent

KeithV
Posts: 181
Joined: Tue Sep 13, 2011 4:40 pm
Contact:

Re: New test builds available for 20110907

Post by KeithV » Thu Oct 13, 2011 6:21 pm

Oh, Andy,

I also updated the Ethernet init code and took out all of the junk you pointed out. So you should not have to modify the init code anymore.
KeithV
Digilent

jack23233
Posts: 4
Joined: Fri Sep 02, 2011 6:52 pm

Re: New test builds available for 20110907

Post by jack23233 » Sun Dec 04, 2011 7:08 am

My project involves using OneWire ver. 2.1 and the DallasTemperature Library to read ds18x20s.

The new PJRC OneWire 2.1 purports to be compliant with ChipKit.

I tried to run Multiple.pde code under OneWire2.1, which failed to compile under 20110907.

When I reverted to the 'official' release 20110822, the code ran fine.


I understand that the 0907 is 'test'.

I am ecstatic that the UNO32 will now operate my project, even under 0822.
Kudo's to ChipKit and PJRC.

Post Reply