USB bootloader

Announcements for new builds and MPIDE enhancements
Post Reply
Mark
Posts: 116
Joined: Sat May 21, 2011 4:26 pm

USB bootloader

Post by Mark » Fri Aug 26, 2011 11:48 pm

The source for the USB bootloader is now on github.

This bootloader will will work with any PIC32 that has a built in USB port. I have tested it fully on several of the Microchip Starter kits such as the PIC32-USB-Starter Kit.

You will need MPLAB-X to compile and program the bootloader. MPLAB-8 can probably be used as well but I do not have the project set up for it.

Mplab-X is cross platform based on NetBeans. It is free and is available from http://www.microchip.com/mplabx

Special thanks to Rich T for the hard work on the USB bootloader

Mark

Post Reply