[SOLVED] PIC32 external trigger

User avatar
Posts: 12
Joined: Wed Dec 02, 2015 10:43 pm

Re: PIC32 external trigger

Post by jwzumwalt » Mon Mar 07, 2016 5:36 pm

I primarily use the Pinguino.cc IDE and I just discovered that half my problem is UECIDE IDE and Pinguino.cc IDE do not use the same pin assignments. For example Pinguino.cc uses pin 32 for the green LED but UECIDE does not recognize this. However, I was able to confirm that this function works with UECIDE but DOES NOT WORK WITH PINGUINO.CC

I assume, but could not verify this function works with Mpide because Mpide requires a different bootloader.

User avatar
Site Admin
Posts: 2188
Joined: Wed Nov 09, 2011 7:51 pm
Location: UK

Re: PIC32 external trigger

Post by majenko » Mon Mar 07, 2016 6:00 pm

You cannot use the Pinguino Micro with MPIDE unless you either replace the bootloader or re-program MPIDE to use pic32prog in the right way and also compile with the special Pinguino Micro linker script.
Why not visit my shop? http://majenko.co.uk/catalog
Universal IDE: http://uecide.org
"I was trying to find out if it was possible to only eat one Jaffa Cake. I had to abandon the experiment because I ran out of Jaffa Cakes".

Post Reply