Shield compatibility list

Posts: 64
Joined: Tue May 15, 2012 8:17 pm
Location: Paris

Re: Shield compatibility list

Post by PICedh » Sun Jul 29, 2012 9:57 pm

This one works fine :
Arduino Wireless Shield SD
RobotEdh: My first Robot is controlled by a chipKIT Max32

Posts: 1
Joined: Wed Apr 03, 2013 10:10 pm

Re: Shield compatibility list

Post by floschnell » Wed Apr 03, 2013 10:30 pm

The WiShield 3.0 (from elechouse) isn't working with the standard Arduino library.
I made some adjustments to it though (pin, spi and interrupts). I was a bit in a hurry, could have done it more carefully. But good thing is it should be working now.

You can find the library here (it is a modified Arduino version that I downloaded somewhere on github, I will put the link here soon when I'm able to find it again): ... kit-uno32/

User avatar
Posts: 105
Joined: Fri Aug 23, 2013 2:31 am
Location: San Diego

Adafruit 1.8" TFT w/joystick & SD Card on chipKIT uc32 (SPI)

Post by unexpectedly » Wed Aug 28, 2013 7:49 am

I got it working by porting the Adafruit GFX and ST7735 libraries to chipKIT. And also removing all delays. See this post/thread. Zip of my code attached, too.

May there now please be a third example on the internet of someone making this TFT work with chipKIT. :D
(25.59 KiB) Downloaded 83 times

Posts: 3
Joined: Tue Nov 26, 2013 4:06 pm

Re: Shield compatibility list

Post by abelbor » Fri Nov 29, 2013 7:26 pm

someone use the W5100 ethernet shield and chipkit?

Posts: 5
Joined: Fri Oct 25, 2013 7:59 pm

Re: Shield compatibility list

Post by biomurph » Thu Apr 02, 2015 6:48 pm

Thanks for the tip, unexpectedly!
Got the Adafruit_GFX and Adafruit_SarpMem libraries ported to chipKIT Uno32. Fun Stuff!

Here's the repo

Going to get some EEPROM to store frames for more complex animations

Post Reply