Need help with the USB on network Shield

Post Reply
Snucle
Posts: 2
Joined: Mon Jun 01, 2015 9:15 am

Need help with the USB on network Shield

Post by Snucle » Mon Jun 01, 2015 9:45 am

Hi everyone,
I work in electronics a lot with the chipkit max32, i bought the network Shield to play with the LAN at first and now I want to try my hand on the USB,
So basically what I want to do at first is to simply plug an USB drive ( like any generic USB drive of 8G more or less) write data on it.
For this I lanched MPIDE 0023-windows-20140316, added the network shield's library from digilent website and compiled the USBMSDHOST program from the examples.
Apprently wend just this is done, you just have to plug an usb drive, wait about 30 sec and you have on your USB drive a TEST.txt whit "This is a test " in it.
but, and this is my problem, this doesn't work at all!!!
my USB drive is connected on type A, and the jumper is well connected.
Does anybody already had a thing like this?
And more importantly how I make it work?
thanks

Snucle
Posts: 2
Joined: Mon Jun 01, 2015 9:15 am

Re: Need help with the USB on network Shield

Post by Snucle » Thu Jun 11, 2015 10:54 am

find it,
the usb controller of the Kit didn't recognize my stick
it worked just fine with another one

Post Reply