i have developped a program (Chipkit UNO32 & MPIDE) which uses the Input Capture 1:
OpenCapture1(IC_SP_EVERY_EDGE | IC_TIMER2_SRC | IC_FEDGE_RISE | IC_ON);
and use the pin 8 as output: pinMode(8,OUTPUT);
and all work fine.
Due to PCB problems I moved only the signal from the pin 8 to the pin 5: pinMode(5,OUTPUT);
At this point the input Capture don't work.
Any suggestion ?
Thank you in advance for your help.
Talk about anything you want!
1 post • Page 1 of 1