Search found 9 matches

by BerndK
Sat Jun 18, 2016 12:08 pm
Forum: IDE Integration
Topic: MX150F128B works allmost fine but some strange behavior
Replies: 13
Views: 3802

Re: MX150F128B works allmost fine but some strange behavior

Looks like I have successfully flashed a UART bootloader from this thread for MX150f128B. Appears to pulse pin 7 (RB3) at 4Hz when placed in boot mode (RB7 High + RST). http://chipkit.net/forum/viewtopic.php?f=17&t=2438 Does anyone know if there are MPIDE configuration files for this setup? Thanks ...
by BerndK
Sat Jun 18, 2016 11:52 am
Forum: IDE Integration
Topic: MX150F128B works allmost fine but some strange behavior
Replies: 13
Views: 3802

Re: MX150F128B works allmost fine but some strange behavior

... Still looking at way to modify bootloader baud rate from 115200 to lower rate 19200 ? Would appreciate any help. ... JohnL Hi John, the baud rate ist defined in the bootloader. You have to change it in the .c -file. The upload speed is defined in boards.txt. Baud rate and upload speed must be t...
by BerndK
Tue Feb 19, 2013 10:24 pm
Forum: Software Builds and Announcements
Topic: MPIDE 20121013 Test Build
Replies: 18
Views: 7374

Re: MPIDE 20121013 Test Build

Thanks a lot for supporting PIC32MX1xx/2xx MCUs. Great job! I have build my own board with a PIC32MX1502 8Pin DIP version. At present I tested digital I/O, Serial, WIRE and SPI and got it working. Details on: http://www.chipkit.org/forum/viewtopic.php?f=6&t=2227 To run SPI or DSPI library I had to c...
by BerndK
Tue Feb 19, 2013 10:05 pm
Forum: IDE Integration
Topic: MX150F128B works allmost fine but some strange behavior
Replies: 13
Views: 3802

Re: MX150F128B works allmost fine but some strange behavior

SPI and DSPI tested. After initialising the PPS Pins .. SDI2R = 0x3; //SDI2 := RB13 RPB11R = 0x4; //SDO2 := RB11 everything is fine. At present I use the MX150 with Digilent Pmod NIC100 as a Web server. Some minor changes to the Digilent DNETcK library and configuring PPS INT1 Pin INT1R = 0x2 ; //IN...
by BerndK
Mon Feb 18, 2013 2:09 am
Forum: IDE Integration
Topic: MX150F128B works allmost fine but some strange behavior
Replies: 13
Views: 3802

Re: MX150F128B works allmost fine but some strange behavior

Sorry, max three Attachments.

Here is the part of the boards.txt file I added.

Bernd
by BerndK
Mon Feb 18, 2013 2:05 am
Forum: IDE Integration
Topic: MX150F128B works allmost fine but some strange behavior
Replies: 13
Views: 3802

Re: MX150F128B works allmost fine but some strange behavior

Here is the Github repo : https://github.com/chipKIT32/PIC32-avrdude-bootloader You may find some more information here: http://www.chipkit.org/forum/viewtopic.php?f=6&t=1824 I used _BOARD_EXAMPLE_MX1_ as a basis and made some changes to BoardConfig.h (see attachment). I also attached the MPIDE vari...
by BerndK
Sun Feb 17, 2013 7:21 pm
Forum: IDE Integration
Topic: MX150F128B works allmost fine but some strange behavior
Replies: 13
Views: 3802

Re: MX150F128B works allmost fine but some strange behavior

Hey Jason, thats it! I2C1CONbits.DISSLW = 1; and it works fine! :D Thank's a lot. What I described above were the only changes I had to do. Very important is to use the latest version of the bootloader source and the latest version of MPIDE (20121013). In addition I adopted pin maping in the MPIDE v...
by BerndK
Sun Feb 17, 2013 2:39 pm
Forum: IDE Integration
Topic: MX150F128B works allmost fine but some strange behavior
Replies: 13
Views: 3802

Re: MX150F128B works allmost fine but some strange behavior

One Problem solved: ..MX150F128B is not supported by the bootloader... Error Message:" avrdude: AVR Part "32MX150F128B" not found." In "avrdude.conf" I just copied the Section for the "Pic CPU PIC32MX250F128D added by Brian Schmalz, May 2012" and changed part id to = "pic32-150-128"; desc to = "32MX...
by BerndK
Sat Feb 16, 2013 2:08 pm
Forum: IDE Integration
Topic: MX150F128B works allmost fine but some strange behavior
Replies: 13
Views: 3802

MX150F128B works allmost fine but some strange behavior

Thanks very much for supporting MX1xx and MX2xx PIC32 :D I build a Board with an PIC32MX150 28 Pin DIP Version. > some minor changes to the new bootloader (Oscilator settings - using the intern one - , Prozessor Type, Flash size, LEDs) and it worked fine. I used _BOARD_EXAMPLE_MX1_ as a basis. Thank...